What should I do if the furniture plywood warps or cracks?

Plywood warping or deformation is usually caused by high internal stress, which may be related to humidity changes in the storage environment or improper moisture content control of the product itself. If you notice warping, stop using it immediately, take photos for records, and contact our after-sales team within the warranty period. Our "full after-sales guarantee" promises: for confirmed quality issues, no discount negotiations — 100% full compensation and coverage of replacement shipping costs.

How long is the warranty period for furniture plywood?

Our furniture plywood provides a 12-month warranty from the date of arrival. During the warranty period, essential quality problems such as insufficient bonding strength (delamination), large-area surface blistering, or severe warping deformation are all covered by full compensation.

What causes blistering or local delamination on the plywood surface?

Blistering and local delamination are usually related to the following factors: excessive moisture content of veneers, uneven glue application, improper hot-pressing process control, etc. Our company strictly controls every process through a full-process quality control system, from raw material intake to finished product delivery, ensuring stable quality of every panel. If such problems occur, please contact after-sales promptly.

What should I do if the received panels have a color difference from the sample?

Natural wood and veneer materials may show slight color differences across batches and under different light sources, which is normal. Our company uses a spectrophotometer to control batch-to-batch color difference ΔE ≤ 0.5, which is difficult to distinguish with the naked eye. If the color difference exceeds the normal range, please provide comparison photos within 15 working days after receipt. The after-sales team will respond and handle it within 48 hours.

How exactly does our "full after-sales guarantee" work?

After the customer discovers a quality problem, submit a complaint via email with clear photo/video evidence → our company gives a preliminary reply within 48 hours → a formal quality determination report is issued within 7 working days → if company responsibility is confirmed, 100% full compensation is immediately initiated, and replacement or refund is arranged, with replacement shipping costs borne by us.

How can I contact the after-sales team?

You can contact after-sales through the following methods:📞 +86-0539-3198222 / +86-13145499135📧 info@plywood.ltdPlease indicate the order number, product batch, and problem description in the email, and attach clear photos or videos so we can handle it quickly.

What situations are not covered by the warranty?

The following situations are not covered:① Deformation or cracking caused by improper storage (humidity too high or too low, prolonged sun exposure, rain, etc.);② Damage caused by improper processing (cutting, grooving, drilling errors);③ Damage caused by improper installation or use, or human factors;④ Quality claims raised after the warranty period expires.

What should I do if I find transport damage upon receipt?

Please carefully check the outer packaging and panel appearance before signing. If transport damage is found, take photos immediately and refuse delivery, or contact the after-sales team within 24 hours after receipt. If transport responsibility is confirmed, we will assist you in claiming compensation from the carrier and prioritize replacement to ensure your project progress is not affected.

If a problem is found after the panels have been used for some time, can I still enjoy after-sales service?

As long as it is within the 12-month warranty period and confirmed to be a quality problem of the product itself (such as insufficient bonding strength, severe warping deformation, large-area blistering, etc.), you can enjoy the full after-sales guarantee. However, problems caused by the use environment or improper processing are not covered. It is recommended to contact after-sales as soon as possible after discovering the problem.

What materials are required for after-sales processing?

Please provide the following materials:① Order number or contract number;② Product name, specifications, batch number;③ Problem description and clear photos/videos;④ Date of receipt and description of storage environment;⑤ If already processed, please specify the processing method and usage scenario.The more complete the materials, the faster the processing.

What should I do if I am not satisfied with the after-sales result?

We promise a "full after-sales guarantee." If you have objections to the preliminary result, you can request a review by the after-sales team and submit it to our company's quality committee for final determination. We aim for customer satisfaction; if company responsibility is confirmed after review, we will still implement 100% full compensation and never shirk responsibility.

What should I do if MDF warps or deforms?

MDF warping or deformation is usually related to raw material control, fiber moisture content, board density, mat formation uniformity, hot pressing parameters, and post-treatment. If warping is found, please contact JINDIWOOD after-sales within the warranty period. Our "full after-sales guarantee" covers such quality issues.

What causes a rough surface or sanding marks on MDF?

MDF has very high requirements for surface quality, especially when surface decoration is applied, where a flat and fine surface is essential. A rough surface or sanding marks are usually related to improper control of the sanding process. JINDIWOOD uses a fine sanding process (180–240 grit sanding belts), ensuring surface roughness Ra ≤ 3.2 μm and thickness tolerance within ± 0.15 mm.

How is the screw holding strength of MDF?

MDF has an internal bond strength ≥ 0.55 MPa, with good screw holding. Face screw holding can reach 700–1000 N. However, edge screw holding is relatively weaker. It is recommended to install hardware on the panel face as much as possible. If edge installation is required, pre-inserted nuts or additional connectors are recommended for reinforcement.

Can MDF be used for extra-high cabinet doors?

MDF can be used for cabinet doors, but extra-high doors over 1.9 m have a deformation risk. Recommendations: ① choose high-density MDF (≥ 800 kg/m³); ② increase door thickness (≥ 22 mm); ③ install a straightener on the back of the door; ④ choose a moisture-resistant product and ensure proper edge sealing.

What is the warranty policy for JINDIWOOD MDF?

JINDIWOOD MDF provides a 12-month warranty from the date of arrival. For quality problems such as insufficient internal bond strength, severe warping deformation, or large-area surface defects, we offer full compensation and cover the replacement shipping cost. Damage caused by improper use in humid environments or improper processing is not covered by the warranty.

What is the difference between MDF (Medium Density Fiberboard) and particle board?

MDF is made from wood fibers, which are fine and uniform, offering excellent surface flatness and suitability for decorative finishing and fine carving. Particle board is made from wood chips with a granular internal structure, providing good screw holding and better cost-effectiveness. MDF is ideal for decorative panel substrates, door profiles, and carved parts; particle board is suitable for cabinet bodies, shelves, and other structural components.

What eco-friendly grades are available for MDF? How to identify them?

JINDIWOOD MDF offers three eco-friendly grades: E1 (≤ 0.050 mg/m³), E0 (≤ 0.025 mg/m³), and ENF (≤ 0.015 mg/m³). When purchasing, first check whether the product label information is complete, and confirm the product type and formaldehyde emission grade marking. It is recommended to choose a manufacturer with a good brand reputation and avoid products without labels or with a strong irritating odor.

How is the moisture resistance of MDF? Can it be used in kitchens or bathrooms?

Standard MDF has average moisture resistance, with a 24-hour thickness swelling rate ≤ 15%. For humid environments such as kitchens and bathrooms, it is recommended to choose moisture-resistant MDF (24-hour thickness swelling ≤ 10%) with strict edge sealing. Unsealed MDF edges will swell severely after water contact, so it is not recommended for long-term water exposure or outdoor use.

How does MDF perform in CNC carving and milling?

MDF is homogeneous, dense, and isotropic, making it the best material among all wood-based panels for CNC carving and milling. It can be CNC engraved, milled, grooved, and profiled, suitable for door profiles, Roman columns, decorative moldings, crafts, etc. The machined surface is smooth and requires no secondary repair.

What thickness and sizes are available for MDF?

JINDIWOOD MDF thickness ranges from 2 mm to 30 mm, with common thicknesses including 2.5, 3, 4, 5, 6, 8, 9, 12, 15, 18, 22, and 25 mm. Standard size is 1220 × 2440 mm. Custom sizes such as 1220 × 2810 mm, 1220 × 3035 mm, and 1220 × 3660 mm are also available. Thin board density ≥ 830 kg/m³, thick board density ≥ 750 kg/m³, higher than national standard requirements.

What should I do if the formwork blisters or partially delaminates?

Blistering and partial delamination are usually related to the following factors: excessive moisture content or uneven drying of veneers, excessive glue spread, too fast pressure release, insufficient pressing time, etc. If such problems occur, stop using the product immediately and contact JINDIWOOD after-sales service. Once confirmed as a quality issue, it will be handled under the “Full After-Sales Guarantee” policy.

What causes film delamination or peeling on formwork?

Film delamination is usually related to the following factors: low hot-pressing temperature leading to insufficient film paper adhesion; poor base paper quality or uneven resin impregnation; failure to press into one integrated board during hot pressing; poor impregnation quality of the film paper. JINDIWOOD minimizes such problems through strict hot-pressing process control and the selection of high-quality base paper.

What causes insufficient strength of formwork?

Insufficient formwork strength is usually related to low adhesive quality or improper control of hot-pressing conditions (temperature not high enough, pressure too low, time too short). JINDIWOOD formwork has a modulus of rupture ≥50 MPa (parallel to grain) and a modulus of elasticity ≥7500 MPa, far exceeding national standard requirements, ensuring construction safety.

How should formwork be stored and maintained?

Proper storage and maintenance of formwork can significantly extend its service life: ① Clean concrete residue from the panel surface promptly after use to avoid scratching the film with hard objects; ② Store horizontally with wood blocks underneath to keep it flat; ③ Avoid direct sunlight and rain, and maintain ventilation; ④ Long-term storage areas should have rain and moisture protection measures; ⑤ Check formwork condition regularly and replace it promptly when film damage is found.

What is JINDIWOOD’s warranty policy for formwork?

JINDIWOOD formwork comes with a 12-month warranty from the date the goods arrive. For quality issues such as insufficient bonding strength, severe blistering or delamination, or reuse times far below the promised standard, we provide full compensation and cover replacement shipping costs. Damage caused by improper construction operations or improper storage is not covered by the warranty.

What is film faced formwork plywood? What is the difference from ordinary formwork?

Film faced formwork plywood is an engineered formwork panel made of a high-quality plywood substrate, covered with a phenolic resin-impregnated film and bonded under high temperature and high pressure. Differences from ordinary formwork: ① The surface film layer is waterproof and wear-resistant, allowing 20–30 reuses, compared with only 3–5 for ordinary formwork; ② The poured concrete surface is smooth as a mirror, achieving a fair-faced concrete effect; ③ Resistant to acid, alkali, and weather, suitable for various construction environments.

What factors affect the reuse times of formwork plywood?

The reuse times of formwork plywood are affected by multiple factors: ① Film quality — resin impregnation amount and curing degree determine wear resistance and alkali resistance; ② Core hardness — hardwood core (eucalyptus/birch) has better compression resistance than softwood core (poplar); ③ Construction operations — proper stripping and timely cleaning of residual mortar can greatly extend service life; ④ Storage conditions — horizontal storage, rain and moisture protection, avoiding prolonged sun exposure; ⑤ Release agent use — reasonable use protects the film layer.

How to choose the thickness and grade of formwork plywood?

The thickness selection of formwork plywood should comprehensively consider concrete lateral pressure and support spacing. Common thicknesses are 12–30 mm, with 18 mm being the mainstream in the market. Grade selection recommendations: low-rise residential (≤6 floors): choose 15 mm glued/film-faced panel; mid-to-high-rise (7–18 floors): choose 18 mm high-quality film-faced panel; super high-rise (≥30 floors): choose 18–20 mm high-strength film-faced panel (hardwood core); fair-faced concrete: choose premium film-faced panel. The higher the reuse requirement, the higher the grade should be selected.

What is the difference between the surface colors of formwork plywood?

The film colors of formwork plywood (black, brown, red) mainly differ in film paper material and brand identification; the color itself does not affect physical performance. Different manufacturers use different colors for brand differentiation. When purchasing, focus on film paper quality rather than color.

Complete Custom Outer Packaging Solution

Mexican Client · Printing Company Name / Information / LOGO on Outer Packaging · Executed per Delivery Standards

Author: JINDIWOOD Source: JINDI WOOD Marketing Department Published: 2026-09-22 20:18 更新: 2026-09-28 12:36 Views: 7 约 12 分钟阅读

custom outer packaging Mexican client packaging printing company name printing LOGO printing export packaging custom wooden crate custom pallet delivery standard one-stop packaging fumigation-free packaging outer packaging design packaging solution Mexico export packaging custom brand identification

Client Requirement:
The Mexican client requires a complete custom outer packaging solution covering product packaging, transport protection, brand identification, and export delivery requirements, strictly executed according to delivery standards. The outer packaging must be printed with the client’s company name, information, and LOGO.

Solution:

Custom Packaging Design
Based on product dimensions, weight, and transport method, design a complete solution including wooden pallets, wooden crates, cartons, and moisture-proof packaging, suitable for sea freight, land transport, and multiple handling.
Custom Materials and Structures
Use fumigation-free plywood crates, high-strength pallets, moisture-proof film, corner protectors, and strapping bands to achieve moisture, impact, scratch, and deformation resistance.
Custom Branding and Identification
Per the Mexican client’s requirements, print the company name, company information, LOGO, shipping marks, labels, packing list, and country of origin on the outer packaging, ensuring clear, accurate, and export-compliant information.
Execution per Delivery Standards
From drawing confirmation, sampling, mass production, to packaging and container loading, systematically inspect dimensions, materials, printing, load capacity, and appearance, strictly according to the delivery standards confirmed by the client.
Full-Process Delivery Guarantee
Requirement confirmation → Solution design → Sample confirmation → Mass production → Quality inspection → Packaging → Container loading → Delivery. Provide inspection photos or videos for each batch to ensure solid packaging, accurate marking, and on-time delivery.

Core Advantages:
From inner to outer packaging, one-stop customization executed per delivery standards. The outer packaging is printed with the client’s company name, information, and LOGO, saving the Mexican client time, effort, and communication costs.

FAQ

Q1: What information can be printed on the outer packaging?
A: Per client requirements: company name, company information, LOGO, shipping marks, labels, packing list, country of origin, etc., ensuring clear, accurate, and export-compliant information.

Q2: What does the complete custom outer packaging solution include?
A: It includes the design of wooden pallets, wooden crates, cartons, and moisture-proof packaging, as well as the selection of moisture-proof film, corner protectors, and strapping bands. Customized according to dimensions, weight, and transport method to achieve moisture, impact, scratch, and deformation resistance.

Q3: How is compliance with delivery standards ensured?
A: From drawing confirmation, sampling, mass production, to packaging and container loading, dimensions, materials, printing, load capacity, and appearance are systematically inspected, strictly according to the delivery standards confirmed by the client. Inspection photos or videos are provided for each batch.

Q4: Is this suitable for export to Mexico?
A: Yes. Fumigation-free materials are used, complying with export requirements and suitable for sea freight, land transport, and multiple handling. Solid packaging, accurate marking, and on-time delivery are guaranteed.

Q5: What are the lead time and minimum order quantity?
A: After sample confirmation, delivery is usually 15–25 days, depending on order complexity. The minimum order quantity is negotiable; small trial orders are supported.